Hubbardton-forge 205772L Uživatelský manuál stáhnout pdf

Installation Instructions B225

Forged Leaf and Stem Sconce 20-5770L & 20-5770R Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

26776

Caution: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all applications. If

installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: The hardware provided is intended for use in wood frame construction and may not be suitable for all

applications. If installing in non-wood frame applications, please consult a qualified builder to determine and obtain the

appropriate fasteners.

To Install Fixture (Figure 1)

Component Parts

A Cross Head Machine Screws (2) (Provided)

B Back plate

C Crossbar

D Ground Screw

Caution: Be sure power is off at the main

breaker box prior to installation.

1. Carefully unpack the fixture from the

carton.

2. Using two machine screws (not

provided), fasten the crossbar (C) to the

electric box (see illustration), making

sure that fixture mounting holes are

level.

Note: A new electric box comes with

screws. When replacing a fixture, retain

the existing screws for use with the new

fixture.

3. Using suitable wire connectors (not

provided) connect fixture wires to

supply wires (white to white and black

to black). If the fixture is wired with

twin lead lamp cord, connect white to

ribbed side of the fixtures cord, black to

smooth side. Run a pigtail lead from

crossbar ground screw (D) to the

junction box and connect all ground

wires (bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

4. Once wires are connected securely line up holes in back plate with the threaded holes in the crossbar. Thread in

the two cross head machine screws provided until back plate is secured against wall.

5. Install light bulb(s) (not provided).

6. Install glass (see instructions below).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

This illustration represents a typical

fixture and may not match every style.

Figure 1

1 2

B225 1
26776 1

Shrnutí obsahu

Strany 1 - 26776

Installation Instructions B225 Forged Leaf and Stem Sconce 20-5770L & 20-5770R Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Strany 2

Installation Instructions B225 Forged Leaf and Stem Sconce 20-5770L & 20-5770R Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205772L Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205772L. Hubbardton Forge 205772L User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205772L