Hubbardton-forge 161040 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28298 C

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

To Install the Canopy (Figures 1 & 2)

Component Parts

A Crossbar

B Ground Screw

C Cupped Washer

D Canopy

E #8 Screws

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the cross-

bar (A) to the electric box.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

3. Height of xture can be set before attaching the xture to

the ceiling. Remove screws w/lock washers (L) and canopy

plate (K) from canopy (D). If height is going to stay at max

length or just a slight height adjustment is needed it

may not be necessary to remove the canopy plate.

Note: Fixture is shipped at max height.

4. Push supply/support cable (H) into canopy gripper (G) until

desired height is reached.

5. Coil supply/support cable (H) in canopy (D) and place

canopy plate (K) in canopy (D). Install screws w/lock wash-

ers (L) to secure plate.

CAUTION: BE SURE NOT TO PINCH THE SUPPLY/SUPPORT CABLE IN

BETWEEN THE CANOPY (D) AND THE CANOPY PLATE (K).

6. Using suitable wire connectors (not provided) connect

xture wires to supply wires (white to white, black to black).

Using the crossbar ground screw (B) and cupped washer (C)

run a pigtail lead to the junction box and connect all ground

wires (bare copper or green to bare copper or green).

A330

Link Low Voltage Pendant 161040

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 2)

(Continued)

F Fixture

G Canopy Gripper

H Supply/Support Cable

K Canopy Plate

L Screws w/Lock Washers

(Figure 1)

SAFETY NUT

1 2

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 161040 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 161040. Hubbardton Forge 161040 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 161040