Hubbardton-forge 205772FL Uživatelský manuál stáhnout pdf

Installation Instructions B233

Forged Leaf and Stem Sconce 20-5770FL & 20-5770FR Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26935

Caution: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all applications. If

installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: The hardware provided is intended for use in wood frame construction and may not be suitable for all

applications. If installing in non-wood frame applications, please consult a qualified builder to determine and obtain the

appropriate fasteners.

To Install Fixture (Figure 1)

Component Parts

A Cross Head Machine Screws (2) (Provided)

B Back plate

C Crossbar

D Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (C) to the electric box (see illustration), making

sure that fixture mounting holes are level.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Using suitable wire connectors (not provided)

connect fixture wires to supply wires (white to

white and black to black). If the fixture is

wired with twin lead lamp cord, connect white

to ribbed side of the fixtures cord, black to

smooth side. Run a pigtail lead from crossbar

ground screw (D) to the junction box and

connect all ground wires (bare copper or green

to bare copper or green).

Caution: Make sure wire connectors are

twisted on securely, and no bare wire is

exposed.

4. Once wires are connected securely line up

holes in back plate with the threaded holes in

the crossbar. Thread in the two cross head

machine screws provided until back plate is

secured against wall. Make sure no wires are

pinched between back plate and wall.

5. Install light bulb (not provided).

6. Install acrylic (see instructions below).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Figure 1

1 2

B233 1
26935 1

Shrnutí obsahu

Strany 1 - 26935

Installation Instructions B233 Forged Leaf and Stem Sconce 20-5770FL & 20-5770FR Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessori

Strany 2

Installation Instructions B233 Forged Leaf and Stem Sconce 20-5770FL & 20-5770FR Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessori

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205772FL Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205772FL. Hubbardton Forge 205772FL User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205772FL