Hubbardton-forge 206741 Uživatelský manuál stáhnout pdf

Installation Instructions B242

Forged Vertical Bars Sconce 20-6740, 206740F & 20-6741, 20-6741F Page 1 of 1

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

26948

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall and Install Glass (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Glass

D Spring Clip (2)

E Mounting Screw (2)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the

crossbar (A) to the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use

with the new fixture.

3. Hold the fixture assembly close to the wall and using

suitable wire connectors, not provided, connect

fixture wires to supply (white to white or ribbed and

black to black or smooth). Run a pigtail lead from

crossbar ground screw (B) to the junction box and

connect all ground wires (bare copper or green to

bare copper or green).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

4. Push fixture assembly firmly to wall, making sure

that no wires are pinched between fixture back and

wall. Align mounting screws (E) with holes in

fixture back and thread into crossbar (A) until fixture

is tight against the wall.

5. Install light bulb. (GU24 included on F version)

6. Slide glass (D) between forged bars and spring clips

(E) until it bottoms out.

7. Restore electricity at main breaker.

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased

this product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

B242 1
26948 1

Shrnutí obsahu

Strany 1 - 26948

Installation Instructions B242 Forged Vertical Bars Sconce 20-6740, 206740F & 20-6741, 20-6741F Page 1 of 1 Hand-Forged, Vermont-Made Lighting

Příbuzné modely 206740

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206741 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206741. Hubbardton Forge 206741 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 206740

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206741