Hubbardton-forge 204915 Uživatelský manuál stáhnout pdf

Installation Instructions B208

For Twilight Sconce 20-4915 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24453

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible due to our kits are used on multiple products and options.

Prepare for installation (Figures 1)

Component Parts

A Fixture Front

B Thumb Screw (2)

1. Carefully unpack the fixture from the carton.

2. Remove fixture front (A) by loosening thumb screws (B). Assemblies

are shipped together. Slide fixture front (B) up to allow it to slip over

screws (B). Set aside for later use.

To Mount Fixture to Wall

(Figures 2)

Component Parts

C Fixture Back

D Crossbar

E Threaded Stud (2)

F Knurl Ball (2)

G Ground Screw

H Cupped Washer

Caution: Be sure power is off at the main breaker box prior

to installation.

1. Using two machine screws (not provided), fasten the

crossbar (D) to the electric box making sure that fixture

mounting holes are level.

Note: A new electric box

comes with screws. When replacing a fixture, retain the

existing screws for use with the new fixture.

2. Thread studs (E) into the appropriate holes in the

crossbar (D). Adjust the studs to proper length to ensure

the fixture will fit snugly to the wall.

3. Hold the fixture back (C) close to the wall and using

suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to

black or smooth). Ground the crossbar using the green

ground screw (G) and cupped washer (H) to secure a pigtail

lead to the bracket.

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

(

continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3

24453 1

Shrnutí obsahu

Strany 1 - 24453

Installation Instructions B208 For Twilight Sconce 20-4915 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Strany 2

Installation Instructions B208 For Twilight Sconce 20-4915 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Strany 3

Installation Instructions B208 For Twilight Sconce 20-4915 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 204915 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 204915. Hubbardton Forge 204915 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 204915