Hubbardton-forge 205231 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

19413 A

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard

wall surface and may not be suitable for all applications. If installing in

a non-wood frame application, we recommend consulting a qualified

builder or electrician.

To Mount Fixture to Wall and Install Glass (Figure 1)

Component Parts

A Crossbar F Leaf Assembly

B Ground Screw G Glass

C Threaded Stud (2) H Retaining Ring

D Fixture Assembly

E Knurled Ball (2)

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the cross

bar (A) to the electric box making sure that xture mounting

holes are level.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

3. Remove four screws (B) from front of xture to release wall

mounting bracket and discard screws.

4. Hold the xture assembly (D) close to the wall and using

suitable wire connectors, not provided, connect xture

wires to supply (white to white or ribbed and black to black

or smooth). Run a pigtail lead from crossbar ground screw

(B) to the junction box and connect all ground wires (bare

copper or green to bare copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

5. Slide xture assembly (D) over threaded studs (C) and push

rmly to wall, making sure that no wires are pinched

between xture back and wall. Fasten with knurled balls (E).

Be sure threaded studs (C) are fully seated in the knurled

balls (E).

B73

Twining Leaf Sconce 205231

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

1 2

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205231 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205231. Hubbardton Forge 205231 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205231