Hubbardton-forge 205305 Uživatelský manuál stáhnout pdf

Installation Instructions B232

Callas Sconce 20-5305 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26934

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible due to our kits are used on multiple products and options.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Fixture

B Crossbar

C Threaded Stud (2)

D Knurl Ball (2)

E Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not

provided), fasten the crossbar (B) to

the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes

with screws. When replacing a

fixture, retain the existing screws for

use with the new fixture.

3. Thread studs (C) into the

appropriate holes in the crossbar

(B). Adjust the studs to proper

length to ensure the fixture will fit

snugly to the wall.

4. Hold the fixture (A) close to the

wall and using suitable wire

connectors (not provided) connect

fixture wires to supply (white to

white or ribbed and black to black

or smooth). Run a pigtail lead from

crossbar ground screw (E) to the

junction box and connect all ground

wires (bare copper or green to bare

copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture (A) over threaded studs (C) and push firmly to wall, making sure that no wires are pinched between

fixture and wall. Fasten with knurl balls (D). Be sure threaded studs (C) are fully seated in the knurl balls (D).

6. See instructions following to complete installation.

(

continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

26934 1

Shrnutí obsahu

Strany 1 - 26934

Installation Instructions B232 Callas Sconce 20-5305 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 S

Strany 2

Installation Instructions B232 Callas Sconce 20-5305 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 S

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205305 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205305. Hubbardton Forge 205305 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205305