Hubbardton-forge 206350 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30718

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

B316

Cosmo Sconce 206350

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Continued)

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Machine Screws (not provided)

D Threaded Stud (2)

E Fixture Assembly

F Knurled Balls (2)

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (C), fasten the crossbar (A) to

the electric box making sure that xture mounting holes are

level.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

3. Thread studs (D) into the appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the

xture will t snugly to the wall.

4. Hold the xture assembly (E) close to the wall and using

suitable wire connectors, (not provided), connect xture

wires to supply (white to white and black to black). Run a

pigtail lead from the crossbar ground screw (B) and connect

all ground wires (bare copper or green to bare copper or

green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

5. Slide fixture assembly (E) over threaded studs (D) and push

firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with

knurled balls (F). Be sure threaded studs (D) are fully

seated in the knurled balls (F).

6. See instructions on next page to install shade.

(Figure 1)

1 2

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206350 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206350. Hubbardton Forge 206350 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206350