Hubbardton-forge 205320 Uživatelský manuál stáhnout pdf

Installation Instructions B268

Calla Sconce 20-5320 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

27239

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud

C Knurled Ball

D Fixture Assembly

E Ground Screw

F Cupped Washer

Caution: Be sure power is off at the main

breaker box prior to installation.

1. Carefully unpack the fixture from the

carton.

2. Using two machine screws (not

provided), fasten the crossbar (A) to the

electric box making sure that fixture

mounting holes are level. The crossbar

must be mounted with the tab centered

on the top and facing out.

Note: A new electric box comes with

screws. When replacing a fixture, retain

the existing screws for use with the new

fixture.

3. Thread stud (B) into knurled ball (C).

Be sure threaded stud (B) is fully seated

in the knurled ball (C).

4. Hold the fixture (D) close to the wall

and using suitable wire connectors, (not provided), connect fixture wires to supply (white to white or ribbed and

black to black or smooth). Run a pigtail lead from crossbar ground screw (E) to the junction box and connect all

ground wires (bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Align fixture assembly (D) over crossbar (A) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Slide threaded stud (B) down through fixture (D) and thread into crossbar (A).

Tighten until fixture (D) is snug against the wall. Be sure that the bottom tab on crossbar is aligned with the tab

on fixture (D).

6. See instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B268 1
27239 1

Shrnutí obsahu

Strany 1 - 27239

Installation Instructions B268 Calla Sconce 20-5320 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30

Strany 2

Installation Instructions B268 Calla Sconce 20-5320 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205320 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205320. Hubbardton Forge 205320 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205320