Hubbardton-forge 206745 Uživatelský manuál stáhnout pdf

Installation Instructions B47

For Forged Wave Sconce 20-6745L & 20-6745R Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

16163 Rev A

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurl Ball (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (A) to the electric box making sure

that fixture mounting holes are level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use

with the new fixture.

3. Thread studs (B) into the appropriate holes in the

crossbar (A). Adjust the studs to proper length to

ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall

and using suitable wire connectors, not provided,

connect fixture wires to supply (white to white

or ribbed and black to black or smooth). Connect

all ground wires to ground screw.

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurl balls (C). Be sure threaded studs (B) are fully seated in the

knurl balls (C).

6. See instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

16163 Rev A 1

Shrnutí obsahu

Strany 1 - 16163 Rev A

Installation Instructions B47 For Forged Wave Sconce 20-6745L & 20-6745R Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Strany 2

Installation Instructions B47 For Forged Wave Sconce 20-6745L & 20-6745R Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206745 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206745. Hubbardton Forge 206745 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206745