Hubbardton-forge 205315 Uživatelský manuál stáhnout pdf

Installation Instructions B263

Calla Sconce with Shade 20-5315 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

27151

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Ball (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided),

fasten the crossbar (A) to the electric box

making sure that fixture mounting holes are

level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread studs (B) into the appropriate holes in

the crossbar (A). Adjust the studs to proper

length to ensure the fixture will fit snugly to

the wall.

4. Hold the fixture (D) close to the wall and

using suitable wire connectors, not provided,

connect fixture wires to supply (white to white

or ribbed and black to black or smooth). Run a

pigtail lead from crossbar ground screw (E) to

the junction box and connect all ground wires

(bare copper or green to bare copper or green).

Caution: Make sure wire connectors are

twisted on securely, and no bare wire is

exposed.

5. Slide fixture assembly (D) over threaded studs

(B) and push firmly to wall, making sure that

no wires are pinched between fixture back and

wall. Fasten with knurled balls (C). Be sure

threaded studs (B) are fully seated in the

knurled balls (C).

6. See instructions on next page to install shade.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B263 1
27151 1

Shrnutí obsahu

Strany 1 - 27151

Installation Instructions B263 Calla Sconce with Shade 20-5315 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 Sou

Strany 2

Installation Instructions B263 Calla Sconce with Shade 20-5315 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 Sou

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 205315 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 205315. Hubbardton Forge 205315 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 205315