Hubbardton-forge 204710 Uživatelský manuál stáhnout pdf

Installation Instructions B177

For Antasia Sconce 20-4710L, 20-4710R, 20-4710EL & 20-4710ER Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22737

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products and

options.

To Mount Fixture to Wall with Single Box (Figure 1)

Component Parts

A Crossbar

B Threaded Stud

C Barrel Knob

D Fixture Assembly

E Ground Screw

F Cupped Washer

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (A) to the electric box making sure

crossbar is level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture

3. Thread stud (B) into the appropriate hole in the

crossbar (A). Adjust the stud to proper length to

ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall

and using suitable wire connectors (not provided)

connect fixture wires to supply (white to white or

ribbed and black to black or smooth). Ground the

crossbar (A) using the green ground screw (E)

and cupped washer (F) to secure a pigtail lead to

the bracket. .

Caution: Make sure wire connectors are twisted

on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded stud (B)

and push firmly to wall, making sure that no wires

are pinched between fixture back and wall. Fasten

with barrel knob (C). Be sure threaded stud (B) is

fully seated in the barrel knob (C).

6. See instructions following to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3

B177 1
22737 1

Shrnutí obsahu

Strany 1 - 22737

Installation Instructions B177 For Antasia Sconce 20-4710L, 20-4710R, 20-4710EL & 20-4710ER Page 1 of 3 Hand-Forged, Vermont-Made Lighting a

Strany 2

Installation Instructions B177 For Antasia Sconce 20-4710L, 20-4710R, 20-4710EL & 20-4710ER Page 2 of 3 Hand-Forged, Vermont-Made Lighting a

Strany 3

Installation Instructions B177 For Antasia Sconce 20-4710L, 20-4710R, 20-4710EL & 20-4710ER Page 3 of 3 Hand-Forged, Vermont-Made Lighting a

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 204710 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 204710. Hubbardton Forge 204710 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 204710