Hubbardton-forge 18860 Uživatelský manuál stáhnout pdf

Assembly & Installation Instructions A201

For Adjustable Pendant 18-860 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22657

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal threads of fixture

coupling (B) and screw stem into fixture, being careful not to twist or pinch the wires.

Note: Application of the thread locking compound is necessary to prevent the stem from

loosening during regular maintenance and cleaning of the fixture. Be certain to apply the

compound.

4. See instructions below to complete the installation.

Prepare the Canopy

(Figure 2)

Component Parts

C Jam Nut

D Crossbar

E Threaded Nipple

F Canopy

G Canopy Ring

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread jam nut (C) and crossbar (D) onto threaded nipple (E); leave both parts

loose.

2. Using two machine screws (not provided), temporarily fasten the crossbar (D) to

the electric box.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Adjust the length of threaded nipple (E) in crossbar (D) so that canopy ring (G)

will hold canopy (F) against the ceiling with no threads showing for best

appearance. When the correct adjustment is established, tighten jam nut (C)

against crossbar (D) to hold the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

(Figure 1)

1 2 3

A201 1
22657 1

Shrnutí obsahu

Strany 1 - 22657

Assembly & Installation Instructions A201 For Adjustable Pendant 18-860 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories

Strany 2

Assembly & Installation Instructions A201 For Adjustable Pendant 18-860 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories

Strany 3

Assembly & Installation Instructions A201 For Adjustable Pendant 18-860 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 18860 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 18860. Hubbardton Forge 18860 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 18860