Hubbardton-forge 204910 Uživatelský manuál stáhnout pdf

Installation Instructions B206

For Staccato Three Light Sconce 20-4910 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24451

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Wall Mount Bracket

B Anchors (8)

C #10 Screws (8)

D Fixture Assembly

E #8 x 3/8” Black Screws (2)

F #8 x 3/4” Black Screws (2)

G Green Ground Screw

H Cupped Washer

Caution: Be sure power is off at the main breaker

box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Center the wall mount bracket (A) over the

electrical box being sure to hold it plum and

level. With a pencil, mark the location of all

mounting holes in the wall mount bracket on the

wall behind.

IMPORTANT: Wall mount bracket must be

secured to a solidly mounted electrical box

and/or a framing member in at least two

locations. Do not depend on drywall anchors

alone to support this fixture. If in doubt, contact a

qualified electrician.

Put the wall mount bracket down and drill 1/4"

holes in the locations marked on the wall. For

holes using anchors, place the tapered end of the

anchors (B) into the holes and gently tap them flush to the wall

using a light weight hammer.

3. Thread the wires in the electrical box through the center hole in of the wall mount bracket while moving the

bracket into position. Using the 1" #10 screws (C), screw the bracket securely to the wall. Be careful not to over-

tighten or strip the anchors.

4. Thread the black # 8 screws (E) up through the holes in the top of the wall mount bracket (A). Leave the bottom

screws out for now.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

24451 1

Shrnutí obsahu

Strany 1 - 24451

Installation Instructions B206 For Staccato Three Light Sconce 20-4910 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 8

Strany 2

Installation Instructions B206 For Staccato Three Light Sconce 20-4910 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 8

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 204910 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 204910. Hubbardton Forge 204910 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 204910