Hubbardton-forge 206301 Uživatelský manuál stáhnout pdf

Installation Instructions B161

For Sconces 20-6301L, 20-6301R, 20-6301EL & 20-6301ER Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

20883 Rev A

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Fixture Assembly

C Screws (2)

D Ground Screw

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the

crossbar (A) to the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use

with the new fixture.

3. Hold the fixture assembly (B) close to the wall and

using suitable wire connectors, not provided, connect

fixture wires to supply (white to white or ribbed and

black to black or smooth). Run a pigtail lead from

crossbar ground screw (D) to the junction box and

connect all ground wires (bare copper or green to bare

copper or green).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

4. Carefully tuck all wires behind the crossbar (A) and

place the fixture assembly (B) over the crossbar so the

holes in the top and bottom match the threaded holes in the

crossbar. Secure the fixture by threading the screws (C)

through the holes in the fixture assembly (B) and into the

crossbar (A) using supplied allen wrench.

5. See instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

This illustration represents a typical fixture

and may not match every style.

(Figure 1)

1 2

B161 1
20883 Rev A 1

Shrnutí obsahu

Strany 1 - 20883 Rev A

Installation Instructions B161 For Sconces 20-6301L, 20-6301R, 20-6301EL & 20-6301ER Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Access

Strany 2

Installation Instructions B161 For Sconces 20-6301L, 20-6301R, 20-6301EL & 20-6301ER Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Access

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206301 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206301. Hubbardton Forge 206301 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206301