Hubbardton-forge 204260 Uživatelský manuál stáhnout pdf

Installation Instructions B140

For New Town Sconces 20-4250, 20-4260 & 20-4260F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21191

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Wall Mount Bracket

B Anchors (4)

C #10 Screws (4)

D Fixture Assembly

E #8 Black Screws (2)

F Green Ground Screw

G Cupped Washer

H Set Screw (2)

Caution: Be sure power is off at the main breaker box prior to

installation.

1. Carefully unpack the fixture from the carton.

2. Center the wall mount bracket (A) over the electrical box being sure to

hold it plum and level. Bent end of bracket should face down. With a

pencil, mark the location of all mounting holes in the wall mount bracket on the wall behind.

IMPORTANT: Wall mount bracket must be secured to a solidly mounted electrical box and/or a framing member

in at least two locations. Do not depend on drywall anchors alone to support this fixture. If in doubt, contact a

qualified electrician.

Put the wall mount bracket down and drill 1/4" holes in the locations marked on the wall. For holes using anchors,

place the tapered end of the anchors (B) into the holes and gently tap them flush to the wall using a light weight

hammer.

3. Thread the wires in the electrical box through the center hole in the wall mount bracket while moving the bracket

into position. Using the 1" #10 screws (C), screw the bracket securely to the wall. Be careful not to over-tighten or

strip the anchors.

4. Thread the set screws (H) through the holes in the top of the wall mount bracket (A) so they protrude

approximately 1/4". Leave the bottom screws out for now.

5. Hold the fixture assembly (D) close to the wall mount bracket and using suitable wire connectors (not provided),

connect fixture wires to supply wires (white to white or ribbed and black to black or smooth, and bare copper or

green to bare copper or green). Ground the mounting bracket using the green ground screw (F) and cupped washer

(G) to secure a pigtail lead to the bracket.

6. Carefully tuck all wires behind the fixture assembly and inside the wall mount bracket and place the fixture over

the bracket so that the screws in the top of the wall bracket go through the holes in the top of the fixture. Secure

the fixture by threading the black #8 screws (E) up through the holes in the bottom of the fixture and into the

mounting bracket (A).

Caution: Make sure wire connectors are twisted on securely, and no bare wires are exposed.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B140 1
21191 1

Shrnutí obsahu

Strany 1 - 21191

Installation Instructions B140 For New Town Sconces 20-4250, 20-4260 & 20-4260F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessorie

Strany 2

Installation Instructions B140 For New Town Sconces 20-4250, 20-4260 & 20-4260F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessorie

Příbuzné modely 204250

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 204260 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 204260. Hubbardton Forge 204260 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 204250

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 204260