Hubbardton-forge 161090 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28841 B

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

To Install the Canopy (Figures 1 & 2)

Component Parts

A Crossbar

B Cupped Washer

C Ground Screw

D Canopy

E #8 Screws (2

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Remove two #8 screws (E) and crossbar (A) from canopy (D)

and set aside for later use.

3. Using two machine screws (not provided), fasten the cross-

bar (A) to the electric box.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

4. Height of xture can be set before attaching the xture to

the ceiling. Remove screws w/lock washers (O) and canopy

plate (N) from canopy (D). If height is going to stay at max

length or just a slight height adjustment is needed it may not

be necessary to remove the canopy plate.

Note: Fixture is shipped at max height.

5. Push supply/support cable (G) into canopy gripper (F) until

desired height is reached.

6. Coil supply/support cable (G) in canopy (D) and place

canopy plate (N) in canopy (D). Install screws w/lock wash-

ers (O) to secure plate.

CAUTION: BE SURE NOT TO PINCH THE SUPPLY/SUPPORT CABLE IN

BETWEEN THE CANOPY (D) AND THE CANOPY PLATE (N).

7. Using suitable wire connectors (not provided) connect

xture wires to supply wires (white to white or ribbed side of

the xture cord, black to black or smooth side). Run a pigtail

lead from crossbar ground screw (C) to the junction box and

connect all ground wires (bare copper or green to bare cop-

per or green).

A344

Staccato Pendant Vintage Platinum: 161090

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 2)

F Canopy Gripper

G Supply/Support Cable

N Canopy Plate

O Screws w/ Lock Washer

(Continued)

(Figure 1)

1 2

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 161090 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 161090. Hubbardton Forge 161090 User Manual [en] [es] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 161090