Hubbardton-forge 206410 Uživatelský manuál stáhnout pdf

Installation Instructions B211

For Sconce 20-6410 & 20-6410F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24635 Rev A

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurl Ball (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the

main breaker box prior to installation.

1. Carefully unpack the fixture from

the carton.

2. Using two machine screws (not

provided), fasten the crossbar (A)

to the electric box making sure

that fixture mounting holes are

level.

Note: A new electric box comes

with screws. When replacing a

fixture, retain the existing screws

for use with the new fixture.

3. Thread studs (B) into the

appropriate holes in the crossbar

(A). Adjust the studs to proper

length to ensure the fixture will fit

snugly to the wall.

4. Hold the fixture assembly (D) close to the wall and using suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to black or smooth). Run a pigtail lead from crossbar ground

screw (E) to the junction box and connect all ground wires (bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurl balls (C). Be sure threaded studs (B) are fully seated in the

knurl balls (C).

6. See instructions on next page to install glass or shade depending on option purchased.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B211 1
24635 Rev A 1

Shrnutí obsahu

Strany 1 - 24635 Rev A

Installation Instructions B211 For Sconce 20-6410 & 20-6410F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Strany 2

Installation Instructions B211 For Sconce 20-6410 & 20-6410F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206410 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206410. Hubbardton Forge 206410 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206410