Hubbardton-forge 18453 Uživatelský manuál stáhnout pdf

Assembly & Installation Instructions A259

For Adjustable Mobius Shade Pendant 18-453 Page 1 of 7

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24794 Rev A

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal threads of the

fixture coupling (B) and screw stem into fixture, being careful not to twist the wires.

Note: Application of the thread locking compound is necessary to prevent the stem

from loosening during regular maintenance and cleaning of the fixture. Be certain to

apply the compound.

4. See instructions below to complete the installation.

Prepare the Canopy

(Figure 1)

Component Parts

C Jam Nut

D Crossbar

E Threaded Nipple

F Canopy

G Canopy Ring

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread jam nut (C) and crossbar (D) onto threaded nipple (E); leave both parts loose.

2. Using two machine screws (not provided), temporarily fasten the crossbar (D) to the

electric box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Adjust the length of threaded nipple (E) in crossbar (D) so that canopy ring (G) will

hold canopy (F) against the ceiling with no threads showing for best appearance. When

the correct adjustment is established, tighten jam nut (C) against crossbar (D) to hold

the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the assembly

instructions.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

1 2 3 4 5 6 7

A259 1
24794 Rev A 1

Shrnutí obsahu

Strany 1 - 24794 Rev A

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 1 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 2

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 2 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 3

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 3 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 4

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 4 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 5

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 5 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 6

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 6 of 7 Hand-Forged, Vermont-Made Lighting and A

Strany 7

Assembly & Installation Instructions A259 For Adjustable Mobius Shade Pendant 18-453 Page 7 of 7 Hand-Forged, Vermont-Made Lighting and A

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 18453 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 18453. Hubbardton Forge 18453 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 18453