Hubbardton-forge 306403 Uživatelský manuál stáhnout pdf

Installation Instructions B219

Axis Outdoor Sconce 30-6401 & 30-6403 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

26360 Rev A

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Fixture should be mounted four feet above grade.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Install Fixture (Figures 1 thru 3)

Component Parts

A Fixture Front

B Screw

C Fixture

D Crossbar

E #8 Screw (2)

F Ground Screw (2)

G Caulking Lip

Caution: Be sure power is off at the

main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Loosen the screw (B) in the bottom of the fixture (C) until the fixture front (A) will

come loose from the fixture back. Move the fixture front (A) towards the top of the

fixture (C) to remove (Figure 1).

3. Using two machine screws (not provided) attach crossbar (D) to the electric box

using inside oval holes to orient fixture.

Note: A new electric box comes with

screws. When replacing a fixture, retain the screws for use with the new fixture.

4. Using suitable wire connectors (not provided), connect the fixture wires to the

supply wires, (white to white, black to black). Run a pigtail lead from crossbar

ground screw (F) to the junction box and connect all ground wires (bare copper or

green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely and no bare wires are

exposed.

5. Apply a generous bead of a suitable caulking material to caulking lip (G) on the

fixture.

6. Carefully tuck all wires behind the fixture, place fixture firmly against the wall and

fasten with two #8 screws (E). To ensure a water tight seal, apply a thin bead of

caulking around entire perimeter of the fixture.

7. Continue with installation instructions following to assemble fixture front and glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

(Figure 3)

1 2 3

26360 Rev A 1
26360 Rev A 3

Shrnutí obsahu

Strany 1 - 26360 Rev A

Installation Instructions B219 Axis Outdoor Sconce 30-6401 & 30-6403 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Rout

Strany 2

Installation Instructions B219 Axis Outdoor Sconce 30-6401 & 30-6403 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Rout

Strany 3 - 26360 Rev A

Installation Instructions B219 Axis Outdoor Sconce 30-6401 & 30-6403 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Rout

Příbuzné modely 306401 | 306425 | 306420 |

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 306403 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 306403. Hubbardton Forge 306403 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 306401 | 306425 | 306420 |

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 306403