Hubbardton-forge 206450 Uživatelský manuál stáhnout pdf

Installation Instructions B289

Airis Sconce 20-6450 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

28294

To Install Fixture (Figures 1 & 2)

Component Parts

A Crossbar

B 8-32 x 1” Screw

C Fixture

D 8-32 x 3/8” Screw (2)

E Mounting Bracket

F #10 x 1” Screws (2)

G Fixture Back

H Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided) attach crossbar (A) to the

electric box.

Note: A new electric box comes with screws. When

replacing a fixture, retain the screws for use with the new fixture.

3. From center hole of crossbar measure down 13-3/16" and mark location

for first hole for wall mounting bracket (E). Be sure hole location is

vertical to center hole of crossbar (A).

4. Hold mounting bracket (E) so hole matches location marked previously

and mark bottom hole location.

5. Attach mounting bracket (E) using #10 x 1" screws (F).

6. Loosen screws (D) so they do not protrude through edge of mounting bracket (E)

at this time.

Note: Screws are shipped installed in bracket.

7. Install screw (H) in tab on bottom of fixture (C). Screw should only be installed a

couple of turns at this time (Figure 2).

8. Using suitable wire connectors (not provided), connect the fixture wires to the

supply wires, (white to white, white to black, bare copper or green to bare copper

or green).

Caution: Make sure wire connectors are twisted on securely and no bare wires

are exposed.

9. Carefully tuck all wires behind the fixture (G), align bottom of fixture with

mounting bracket (E), place fixture firmly against the wall and fasten with 8-32 x

1" screw (B).

10. Tighten screw (D) on both sides of mounting bracket (E) until snug against fixture.

11. Install light bulb (not provided).

12. See installation instructions below for option purchased.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

(Figure 1)

1 2 3

B289 2
28294 2

Shrnutí obsahu

Strany 1

Installation Instructions B289 Airis Sconce 20-6450 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Cast

Strany 2 - 28294

Installation Instructions B289 Airis Sconce 20-6450 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Cast

Strany 3

Installation Instructions B289 Airis Sconce 20-6450 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Cast

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206450 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206450. Hubbardton Forge 206450 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206450