Hubbardton-forge 207663 Uživatelský manuál stáhnout pdf

Installation Instructions B214

Brindille Sconce 20-7660 & 20-7663 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

24828

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Balls (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main

breaker box prior to installation.

1. Carefully unpack the fixture from

the carton.

2. Using two machine screws (not

provided), fasten the crossbar (A) to

the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes

with screws. When replacing a

fixture, retain the existing screws for

use with the new fixture.

3. Thread studs (B) into the

appropriate holes in the crossbar

(A). Adjust the studs to proper

length to ensure the fixture will fit

snugly to the wall.

4. Hold the fixture assembly (D) close to the wall and using suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to black or smooth). Connect all ground wires to ground

screw.

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurled balls (C). Be sure threaded studs (B) are fully seated in the

knurled balls (C).

6. See instructions on next page to install shade.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B214 1
24828 1

Shrnutí obsahu

Strany 1 - 24828

Installation Instructions B214 Brindille Sconce 20-7660 & 20-7663 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Rout

Strany 2

Installation Instructions B214 Brindille Sconce 20-7660 & 20-7663 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Rout

Příbuzné modely 207660

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 207663 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 207663. Hubbardton Forge 207663 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 207660

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 207663