Hubbardton-forge 206430 Uživatelský manuál stáhnout pdf

Installation Instructions B280

For Axis Vintage Platinum Sconce 20-6430 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

28080

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Fixture should be mounted four feet above grade.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Install Fixture (Figures 1 & 2)

Component Parts

A Fixture Front

B Screw

C Fixture

D Crossbar

E #8 Screw (2)

F Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Loosen the screw (B) in the bottom of the fixture (C) until the fixture front (A)

will come loose from the fixture back. Move the fixture front (A) towards the top

of the fixture (C) to remove (Figure 1).

3. Using two machine screws (not provided) attach crossbar (D) to the electric box

using inside oval holes to orient fixture.

Note: A new electric box comes with screws. When replacing a fixture,

retain the screws for use with the new fixture.

4. Using suitable wire connectors (not provided); connect the fixture wires to

the supply wires, (white to white, black to black). Run a pigtail lead from

crossbar ground screw (F) to the junction box and connect all ground wires

(bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely and no bare

wires are exposed.

5. Carefully tuck all wires behind the fixture, place fixture firmly against the

wall and fasten with two #8 screws (E). To ensure a water tight seal, apply a

thin bead of caulking around entire perimeter of the fixture.

6. Continue with installation instructions following to assemble fixture front

and glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

(Figure 1)

1 2 3

B280 1
28080 1

Shrnutí obsahu

Strany 1 - 28080

Installation Instructions B280 For Axis Vintage Platinum Sconce 20-6430 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Bo

Strany 2

Installation Instructions B280 For Axis Vintage Platinum Sconce 20-6430 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Bo

Strany 3

Installation Instructions B280 For Axis Vintage Platinum Sconce 20-6430 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Bo

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 206430 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 206430. Hubbardton Forge 206430 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 206430