Hubbardton-forge 135001 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30901A

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

To Install the Canopy & Vertical Installation (Figures 1 & 2)

Component Parts

A Crossbar

B Ground Screw

C Cupped Washer

D Canopy

E #8 Screws

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Crossbar (A) is shipped installed. Remove screws (E) from

canopy (D) and save for later use. Remove crossbar (A).

3. Using two machine screws (not provided), fasten the cross

bar (A) to the electric box. (Figure 1)

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

4. Height of fixture can be set before attaching the fixture to

the ceiling. Remove screws w/lock washers (L) and

canopy plate (K) from canopy (D). (Figure 2)

Note: Fixture is shipped at max height.

5. Loosen safety nut on canopy gripper (G) by twisting counter

clockwise. Push supply/support cable (H) into canopy

gripper (G) until desired height is reached.

6. Retighten safety nut on canopy gripper (G).

7. Coil supply/support cable (H) in canopy (D) and place

canopy plate (K) in canopy (D). Install screws w/lock

washers (L) to secure plate.

CAUTION: BE SURE NOT TO PINCH THE SUPPLY/SUPPORT CABLE IN

BETWEEN THE CANOPY (D) AND THE CANOPY PLATE (K).

8. Using suitable wire connectors (not provided) connect fixture

wires to supply wires (white to white, black to black). Run a

pigtail lead from crossbar ground screw (B) to the junction

box and connect all ground wires (bare copper or green to

bare copper or green). (Figure 1)

A370

Quill Pendant 135001

Page 1 of 3

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

F Fixture

G Canopy Gripper

H Supply/Support Cable

K Canopy Plate

L Screws w/Lock Washers

SAFETY

NUT

1 2 3

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Strany 3

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 135001 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 135001. Hubbardton Forge 135001 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 135001