Hubbardton-forge 366520 Uživatelský manuál stáhnout pdf

Installation Instructions A277

For Ceiling Fixture 36-6515 & 36-6520 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26601

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Canopy Loop

G Loop Collar

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box prior to

installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the

crossbar (B) to the electric box.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use with the

new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with

lock nut (C); slide canopy (E) over nipple (D), and attach the

canopy loop (F) to the nipple (D). Adjust the nipple to

proper length to ensure a snug canopy fit before proceeding.

4. Attach one end of the chain (I) to the fixture loop (H). Lace

the wire through every other link of the chain to the end. Slip

wires and chain through the collars and canopy (G, F & E).

Fasten the chain to the canopy loop (F) then slip wires

through the loop and nipple, into the electric box. Make sure

to provide enough slack in the wire to ensure weight of

fixture is supported by the chain.

5. Using suitable wire connectors (not provided) connect

fixture wires to supply wires (white to ribbed side of the

fixture cord, black to smooth side). Run a pigtail lead from

crossbar ground screw (A) to the junction box and connect

all ground wires (bare copper or green to bare copper or

green).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (G) to

canopy loop (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A277 1
26601 1

Shrnutí obsahu

Strany 1 - 26601

Installation Instructions A277 For Ceiling Fixture 36-6515 & 36-6520 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Strany 2

Installation Instructions A277 For Ceiling Fixture 36-6515 & 36-6520 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Příbuzné modely 366515

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 366520 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 366520. Hubbardton Forge 366520 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 366515

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 366520