Hubbardton-forge 366007 Uživatelský manuál stáhnout pdf

Installation Instructions A204

For Outdoor Chain Hung Fixture 36-6007 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22754

To Install Fixture (Figure 1)

Component Parts

A Lock Nut

B Crossbar

C Threaded Stud (2)

D Nipple

E Wood Screws (4)

F Canopy

G Canopy Loop

H Cover Plate

I Knurl Ball (2)

J Chain

K Fixture Loop

L Fixture Top

Caution: Be sure power is off at the main breaker box prior to

installation

1. Carefully unpack the fixture from the carton.

2. Thread studs (C) through appropriate holes in crossbar (B) to

match holes in canopy (F).

3. Thread the nipple (D) into the crossbar (B) and secure with lock

nut (A).

4. Attach one end of the chain to the fixture loop (K). Lace the wire

through every other link of the chain (J) to the end.

5. Slide cover plate (H) and canopy (F) over chain (J) until they rest

against fixture top (L).

6. Fasten the chain to the canopy loop (G) and slip wires through the

canopy loop (G) and nipple (D). Make sure to provide enough

slack in the wire to ensure weight of fixture is supported by the

chain.

7. Raise fixture to ceiling and using at least two wood screws (E)

attach cross bar (B) to a structural member in the ceiling,

centering the crossbar over the outlet box. We've supplied wood

screws with your fixture; however, different materials and/or

construction methods may require different fasteners. If in doubt,

contact a qualified electrician. Do not attach crossbar directly to

outlet box.

8. Using suitable wire connectors (not provided) connect fixture

wires to supply wires (white to ribbed side of the fixture cord,

black to smooth side). Connect all ground wires to crossbar using

ground screw.

Caution: Make sure wire connectors are twisted

on securely, and no bare wire is exposed.

9. Slide canopy (F) and cover plate (H) over threaded studs (C) and

push firmly to ceiling, making sure that no wires are pinched between fixture

canopy and ceiling. Fasten with knurled balls (I). Be sure studs (C) are fully

seated in the knurled balls (I).

10. Install glass (see instructions following).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(

ure 1

)

1 2

A204 1
22754 1

Shrnutí obsahu

Strany 1 - 22754

Installation Instructions A204 For Outdoor Chain Hung Fixture 36-6007 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box

Strany 2

Installation Instructions A204 For Outdoor Chain Hung Fixture 36-6007 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 366007 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 366007. Hubbardton Forge 366007 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 366007