Hubbardton-forge 366005 Uživatelský manuál stáhnout pdf

Installation Instructions A269

For Tourou Ceiling Fixture 36-6005 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24850

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Canopy Loop

G Loop Collar

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B) to the

electric box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock nut (C);

slide canopy (E) over nipple (D), and attach the canopy loop (F) to the

nipple (D). Adjust the nipple to proper length to ensure a snug canopy fit

before proceeding.

4. Attach one end of the chain (I) to the fixture loop (H). Lace the wire

through every other link of the chain to the end. Slip wires and chain

through the collars and canopy (G, F & E). Fasten the chain to the canopy

loop (F) then slip wires through the loop and nipple, into the electric box.

Make sure to provide enough slack in the wire to ensure weight of fixture

is supported by the chain.

5. Using suitable wire connectors (not provided) connect fixture wires to

supply wires (white to ribbed side of the fixture s cord, black to smooth

side). Run a pigtail lead from crossbar ground screw (A) to the junction

box and connect all ground wires (bare copper or green to bare copper or

green).

Caution: Make sure wire connectors are twisted on securely, and no

bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (G) to canopy

loop (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A269 1
24850 1

Shrnutí obsahu

Strany 1 - 24850

Installation Instructions A269 For Tourou Ceiling Fixture 36-6005 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827

Strany 2

Installation Instructions A269 For Tourou Ceiling Fixture 36-6005 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 366005 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 366005. Hubbardton Forge 366005 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 366005