Hubbardton-forge 306007 Uživatelský manuál stáhnout pdf

Installation Instructions B109

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

19767 Rev A

For Direct Wire Fluorescent Wall-Mounted Wet-Location Fixtures Page 1 of 2

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Install the Fixture (Figure 1)

Component Parts

A Fixture

B Knurled Balls (2)

C 8-32 Studs (2)

D Cross Bar

E Caulking Lip

Caution: Be sure power is off at the main breaker box prior to

installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided) attach cross bar (D) to

the electric box using outer oval holes to orient fixture.

Note: A new electric box comes with screws. When replacing a

fixture, retain the screws for use with the new fixture.

3. Thread the two studs (C) into the appropriate holes in the crossbar

(D). Adjust the studs to proper length to ensure the fixture will fit

snugly to the wall.

4. Using suitable wire connectors (not provided), connect the fixture

wires to the supply wires, (white to white, black to black, bare

copper or green to bare copper or green).

Caution: Make sure

wire connectors are twisted on securely and no bare wires are

exposed.

5. Apply a generous bead of a suitable caulking material (not

supplied) to caulking lip (E) on the fixture.

6. Carefully tuck all wires behind the fixture, place fixture firmly

against the wall and fasten with knurled balls (B). To ensure a

water tight seal, apply a thin bead of caulking around entire

perimeter of the fixture (E).

7. Install light bulb (not provided) and glass. (See to install glass

section)

8. Restore electricity at the main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

(Figure 1)

1 2

19767 Rev A 1

Shrnutí obsahu

Strany 1 - 19767 Rev A

Installation Instructions B109 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

Strany 2

Installation Instructions B109 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 306007 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 306007. Hubbardton Forge 306007 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 306007