Hubbardton-forge 303075 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30713

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. Sconces are to be

mounted 4 feet above ground. If installing in a non-wood frame applica-

tion, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figures 1 & 2)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Ball (2)

D Fixture Assembly

E Ground Screw

F Caulking Lip

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the cross

bar (A) to the electric box making sure that xture mounting

holes are level.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Thread studs (B) into the appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the

xture will t snugly to the wall.

4. Hold the fixture (D) close to the wall and using suitable wire

connectors, not provided, connect fixture wires to

supply (white to white and black to black). Run a pigtail lead

from crossbar ground screw (E) to the junction box

and connect all ground wires (bare copper or green to bare

copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON SE-

CURELY, AND NO BARE WIRE IS EXPOSED.

5. Apply a generous bead of a suitable caulking material (not

provided) to calking lip (F) on the fixture. Caulk should be

applied around the entire perimeter of the fixture. (Figure 2).

B314

Flora Outdoor Sconces 303073 & 303075

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Continued)

(Figure 1)

(Figure 2)

1 2

Installation Instructions 1

Shrnutí obsahu

Strany 1 - Installation Instructions

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Příbuzné modely 303073

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 303075 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 303075. Hubbardton Forge 303075 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 303073

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 303075