Hubbardton-forge 217628 Uživatelský manuál stáhnout pdf

Installation Instructions B100

Mosaic Sconce 21-7628 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

19440

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Install Fixture (Figure 1)

Component Parts

A Bulb Shield E Crossbar

B Bulb (included) F Ground Screw

C Knurl Ball (2) G Threaded Stud (2)

D Fixture Back H Socket

Caution: Be sure power is off at the main breaker

box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided) attach

crossbar (E) to the electric box using inside oval

holes to orient fixture. Verify crossbar

orientation is correct before attaching

. Note: A

new electric box comes with screws. When

replacing a fixture, retain the screws for use with

the new fixture.

3. Thread studs (G) into the appropriate holes in

the crossbar (E). Adjust the studs (G) to proper

length to ensure the fixture will fit snugly to the

wall.

4. Using suitable wire connectors (not provided),

connect the fixture wires to the supply wires,

(white to white, black to black, bare copper or

green to bare copper or green). If the fixture is

wired with twin lead lamp cord, connect the

ribbed side to white, and the smooth side to

black. Ground the crossbar (E) using the green

ground screw (F) to secure a pigtail leads to the

crossbar.

Caution: Make sure wire connectors

are twisted on securely and no bare wires are

exposed.

5. Carefully tuck all wires behind the fixture back (D), place fixture back (D) firmly against the wall and fasten with

knurled balls (C).

6. Install light bulb (B). Be careful not to touch bulb with bare hands; oil from your hands will reduce bulb life.

7. Install the light bulb shield (A) by carefully threading it onto the socket (H).

8. Restore electricity at main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B100 1
19440 1

Shrnutí obsahu

Strany 1 - 19440

Installation Instructions B100 Mosaic Sconce 21-7628 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castlet

Strany 2

Installation Instructions B100 Mosaic Sconce 21-7628 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castlet

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 217628 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 217628. Hubbardton Forge 217628 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 217628