Hubbardton-forge 203050 Uživatelský manuál stáhnout pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30763

Assembly & Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

After installation, extra hardware and accessories may be left due to kits

being used on multiple products.

To Mount Fixture to Single Box (Figure 1)

Component Parts

A Fixture

B Mounting Bracket

F Cupped Washer

G Ground Screw

H #8 Black Screws (4)

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the

mounting bracket (B) to the electric box.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Hold the xture (A) close to the mounting bracket (B) and

using suitable wire connectors (not provided) connect xture

wires to supply wires (white to white and black to black).

Run a pigtail lead from the ground screw (G) and

cupped washer (F) to the electrical box and

connect all ground wires (bare copper or green to bare

copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

4. Carefully tuck all wires behind the xture (A) and inside the

mounting bracket (B). Place the xture (A) rmly

onto bracket (B) and fasten with #8 black screws (H) on top.

5. Install two remaining black screws (H) in bottom of xture (A)

attaching to mounting bracket (B).

B318

Lisse Sconce 203050

Page 1 of 3

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

1 2 3

Lisse Sconce 203050 1

Shrnutí obsahu

Strany 1 - Lisse Sconce 203050

Strany 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Strany 3

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 203050 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 203050. Hubbardton Forge 203050 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 203050