Hubbardton-forge 144710 Uživatelský manuál stáhnout pdf

Installation Instructions A205

For Antasia Pendant 14-4710, 14-4710E, 14-4715 & 14-4715E Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22762

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Canopy Loop

G Loop Collar

H Fixture Loop

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B) to the electric

box (see illustration).

Note: A new electric box comes with screws. When replacing a fixture, retain

the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock nut (C); slide

canopy (E) over nipple (D), and attach the canopy loop (F) to the nipple (D).

Adjust the nipple to proper length to ensure a snug canopy fit before proceeding.

4. Attach one end of the chain to the fixture loop (H). Lace the wire through every

other link of the chain to the end. Slip wires and chain through the collars and

canopy (G, F & E). Fasten the chain to the canopy loop (F), slip wires through

the loop and nipple into the electric box. Make sure to provide enough slack in

the wire to ensure weight of fixture is supported by the chain.

5. Using suitable wire connectors (not provided) connect fixture wires to supply

wires (white to ribbed side of the fixture s cord, black to smooth side). Connect

all ground wires to crossbar ground screw (A).

Caution: Make sure wire connectors are twisted on securely, and no bare wire

is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (G) to canopy loop (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A205 1
22762 1

Shrnutí obsahu

Strany 1 - 22762

Installation Instructions A205 For Antasia Pendant 14-4710, 14-4710E, 14-4715 & 14-4715E Page 1 of 2 Hand-Forged, Vermont-Made Lighting and

Strany 2

Installation Instructions A205 For Antasia Pendant 14-4710, 14-4710E, 14-4715 & 14-4715E Page 2 of 2 Hand-Forged, Vermont-Made Lighting and

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 144710 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 144710. Hubbardton Forge 144710 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 144710