Hubbardton-forge 133255F Uživatelský manuál stáhnout pdf

Assembly & Installation Instructions A168

For Vortis Pendant 13-3255F Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21337 Rev A

Prepare the Canopy (Figure 1)

Component Parts

A Jam Nut (2)

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

F Coupling

G Canopy Pipe

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Thread Jam Nuts (A) and Crossbar (B) onto threaded nipple (C) leave parts

loose.

3. Using two machine screws (not provided), temporarily fasten the crossbar (B) to

the electric box.

Note: A new electric box comes with screws. When replacing a fixture, retain

the existing screws for use with the new fixture.

4. Adjust the length of Threaded Nipple (C) in crossbar (B) so that Canopy Ring

(E) will hold Canopy (D) against the ceiling with no threads showing for best

appearance. When the correct adjustment is established, tighten Jam Nuts (A)

against crossbar (B) to hold the adjustment.

5. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

Complete Assembly & Install Fixture

(Figures 2 & 3)

Component Parts

A Jam Nut (2)

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

G Canopy Pipe

H Fixture Pipe

I Plastic Clutch Sleeve

J Clutch

K Set Screw

Caution: Be sure power is off at the main breaker box prior to

installation.

1. Thread crossbar (B) onto threaded nipple (C) until tight against jam

nuts (A).

2. Unscrew the clutch (J) from the fixture pipe (H); slide it across the wires and onto the canopy pipe (G). Follow this

with the plastic clutch sleeve (I), oriented so the tapered end of the clutch sleeve nests in the clutch (Figure 2).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3

A168 1
21337 Rev A 1

Shrnutí obsahu

Strany 1 - 21337 Rev A

Assembly & Installation Instructions A168 For Vortis Pendant 13-3255F Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.

Strany 2

Assembly & Installation Instructions A168 For Vortis Pendant 13-3255F Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.

Strany 3

Assembly & Installation Instructions A168 For Vortis Pendant 13-3255F Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 133255F Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 133255F. Hubbardton Forge 133255F User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 133255F