Hubbardton-forge 134503 Uživatelský manuál stáhnout pdf

Assembly & Installation Instructions A249

For Adjustable Mobius Shade Pendant 13-4503 Page 1 of 7

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24619

Prepare the Canopy (Figure 1)

Component Parts

A Jam Nut

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread jam nut (A) and crossbar (B) onto threaded nipple (C); leave both parts

loose.

2. Using two machine screws (not provided), temporarily fasten the crossbar (B) to

the electric box.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Adjust the length of threaded nipple (C) in crossbar (B) so that canopy ring (E)

will hold canopy (D) against the ceiling with no threads showing for best

appearance. When the correct adjustment is established, tighten jam nut (A)

against crossbar (B) to hold the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

Complete Assembly & Install Fixture

(Figures 2 & 3)

Component Parts

D Canopy

E Canopy Ring

F Canopy Pipe

G Fixture Pipe

H Plastic Sleeve

I Clutch

J Set Screw

K Ground Screw

L Shade Spider

M Retaining Ring

N Socket

Caution: Be sure power is off at the main breaker box prior to installation.

1. Place canopy (D) over canopy pipe (F), followed by canopy ring (E). Make sure smaller diameter side of canopy

ring is oriented up toward the canopy.

2. Thread wires from the fixture pipe (G) through the canopy pipe (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3 4 5 6 7

A249 1
24619 1

Shrnutí obsahu

Strany 1 - 24619

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 1 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 2

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 2 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 3

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 3 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 4

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 4 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 5

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 5 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 6

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 6 of 7 Hand-Forged, Vermont-Made Lighting and

Strany 7

Assembly & Installation Instructions A249 For Adjustable Mobius Shade Pendant 13-4503 Page 7 of 7 Hand-Forged, Vermont-Made Lighting and

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 134503 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Osvětlení Hubbardton-forge 134503. Hubbardton Forge 134503 User Manual [en] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Hubbardton-forge 134503