Hubbardton-forge 714901 Uživatelský manuál stáhnout pdf (Strana 1)

Mirror Installation Instructions F08

CAUTION: FAILURE TO INSTALL THIS PRODUCT PROPERLY MAY RESULT IN PERSONAL

INJURY OR PROPERTY DAMAGE. We recommend installation by a qualified individual trained in the

building trade.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Component Parts

A Anchor

B Z Strip

C Screw

D Hanger strip

E Felt pads (4)

To Install

Caution: Mirror is heavy. Make sure the mounting surface is in good repair and capable of supporting the weight of

the mirror. If in doubt, consult a qualified builder. Attaching mirror directly to a framing member is recommended. If

attaching directly to a framing member, omit anchor (A) from the installation.

1. Place Z strip (B) against wall at the desired location and mark locations of anchors. Be sure Z strip is level when

marking.

2. Install anchors (A), if applicable, by threading directly into the drywall using a number 2 Phillips screwdriver.

3. Install screws (C) through Z strip (B) and into each anchor or directly into a framing member.

4. Mount the 4 felt pads (E) on the corners facing the wall.

5. Hang mirror on Z strip by placing the hanger strip (D) between the lip of the Z strip and the wall.

* Hubbardton Forge will not be liable for injury or damage caused by improper installation or use of this product.

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

16531

Mirror Installation Instructions F08 CAUTION: FAILURE TO INSTALL THIS PRODUCT PROPERLY MAY RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE. We recomme

Příbuzné modely 710118 | 710116 |

Žádné komentáře