Hubbardton-forge 844005 Uživatelský manuál stáhnout pdf

Installation Instructions F15

For Rook Toilet Paper Holder 84-4005

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24320

To Install Component Parts

A Mounting Arm (2)

B Set Screw (2)

C Wall Mount Plate (2)

D Screws (4)

E Wall Anchors (4)

F Removable Bar

G Fixed Bar

H Magnet

1. Remove wall mount plate (C) from the mounting arm (A) by

loosening set screw (B) and sliding wall mount plate (C) from

mounting arm (A). Do this for both arms (Figure 1).

2. Hold first wall mount plate (C) in location it is to be mounted.

With a pencil, mark the location of the mounting holes in the

wall mount plate (C) on the wall behind.

3. Measure 5 1/4" from the marked holes for the location of the

second wall mount plate (C).

4. Put the wall mount plate down and drill 1/4" holes in

the locations marked on the wall if wall anchors (E)

are to be used.

If directly attaching to a solid

support the drilled hole is not needed.

For holes

using anchors, place the tapered end of the anchors

(E) into the holes and gently tap them flush to the

wall using a light weight hammer.

5. Install screws (D) through wall mount plates (C) and

into each anchor (E).

If anchors are not needed the

screws (D) can be installed directly to the wall.

6. Tighten set screw (B) in both arms.

7. Remove tape from end of removable bar (F) and

discard.

8. Slip removable bar (F) through mounting arm (A) with

magnet pointing towards second mounting arm (A) with

fixed bar (G).

9. Once past first arm slip toilet paper roll onto removable

bar (F) and slip bar into second mounting arm until

magnet (H) is touching fixed bar (G).

If you need further assistance, or find that you are missing any

parts, please contact the dealer from which you purchased this

product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage

caused by improper installation or use of this fixture.

CAUTION: FAILURE TO INSTALL THIS PRODUCT PROPERLY MAY RESULT IN PERSONAL INJURY

OR PROPERTY DAMAGE. We recommend installation by a qualified individual trained in the building trade.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and o

eration of the

roduct and the hazards involved.*

(Figure 1)

(Figure 3)

(Figure 2)

24320 1

Shrnutí obsahu

Strany 1 - 24320

Installation Instructions F15 For Rook Toilet Paper Holder 84-4005 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 3

Komentáře k této Příručce

Žádné komentáře

Hubbardton-forge 844005 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro domov Hubbardton-forge 844005. Hubbardton Forge 844005 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro domov Hubbardton-forge 844005